R&S 1332.4500K22, User Manual

Page: 1208 / 1709

Command reference
R&S
®
ZNA
1208 User Manual 1178.6462.02 ─ 20
<TraceFile> String parameter containing the path and file name of the eye
mask file. If the path is omitted, the current directory is used (see
MMEMory:CDIRectory
).
Usage: Setting only
Options: R&S ZNA-K20
Manual operation: See "Save / Load Mask Configuration" on page 756
MMEMory:STORe:EYE:MASK:RESults <TraceName>, <TraceFile>
Saves the detailed results of the mask test in the related eye diagram to an ASCII file
(see
CALCulate<Chn>:EYE:MASK:DATA?
on page 912).
This command will raise an execution error if
CALCulate<Chn>:EYE:MASK:STATe
is
OFF
.
Setting parameters:
<TraceName> The name of the eye diagram whose mask test results shall be
exported
<TraceFile> Mandatory string parameter containing the path and file name of
the file. If the path is omitted, the current directory is used (see
MMEMory:CDIRectory
).
Usage: Setting only
Options: R&S ZNA-K20
Manual operation: See "Export Test Results" on page 753
MMEMory:STORe:EYE:MEASurements <TraceName>, <TraceFile>[,
<DecSeparator>[, <FieldSeparator>]]
Allows to export eye diagram results to an ASCII file (csv), with the possibility to spec-
ify a decimal separator (comma or point) and a field separator (semicolon, comma, tab
or space).
See also
CALCulate<Chn>:EYE:MEASurement:DATA?
on page 918.
Note that the decimal separator and field separator must be different: if both are set to
comma, actually a semicolon will be used as field separator.
Setting parameters:
<TraceName> The name of the eye diagram whose results shall be exported
<TraceFile> Mandatory string parameter containing the path and file name of
the file. If the path is omitted, the current directory is used (see
MMEMory:CDIRectory
).
<DecSeparator> POINt | COMMa
Decimal separator
*RST:
COMMa
SCPI command reference