R&S 1332.4500K22, User Manual

Page: 40 / 1709

Getting Started
R&S
®
ZNA
40 User Manual 1178.6462.02 ─ 20
Function
Keys
Data Entry
Panel
Application Window Control Window
Screen saver
The screen saver function of the operating system can be used to switch off the display
if the analyzer receives no command for a selectable period of time. The display is
switched on again when the touchscreen is touched.
Application window
The left part of the touchscreen is reserved for the application window.
The application window presents the measurement results, mostly in form of diagrams.
The toolbar, softtools and menu bar give access to all instrument functions. For an
introduction to touchscreen operation, refer to
Chapter 3.3.1, "Manual operation" ,
on page 48.
The following sections contain further useful information about manual control of the
instrument.
●
Refer to Chapter 3.3, "Operating the instrument" , on page 48 to learn how to han-
dle traces and diagrams, and how to use menus, keys and softtools.
●
Refer to Chapter 4.2.1, "Display elements of a diagram" , on page 97 to obtain
information about the results in the diagram.
●
Refer to Chapter 5.18, "Display softtool" , on page 769 to learn how to customize
the application window.
Control window: function keys
Most of the (virtual) keys in the upper part of the control window call up a related soft-
tool of the analyzer GUI. Every softtool, in turn, provides access to a group of related
settings and actions (see
Chapter 3.3.2.3, "Softtools" , on page 55).
Instrument tour