Command reference
R&S
®
ZNA
1516
User Manual 1178.6462.02 ─ 20
HALT
Windows is shutdown afer a time-out period of 20 seconds
REBoot
Windows is restarted afer a time-out period of 20 seconds
ABORt
Abort a Windows shutdown/restart. This can only be used during
the time-out period.
CLOSe
Close the firmware.
RESTart
Restart the firmware.
Example:
SYST:SHUT
Switch the analyzer to standby state.
Usage:
Setting only
SYSTem:SOUNd:ALARm[:STATe]
<Boolean>
SYSTem:SOUNd:STATus[:STATe]
<Boolean>
These commands switch alarm or status sounds on or off.
Parameters:
<Boolean>
ON | OFF
*RST:
ON
Example:
SYST:SOUN:ALAR OFF; STAT OFF
Switch alarm and status sounds off.
Manual operation:
See
SYSTem:TIME
<Hours>, <Minutes>, <Seconds>
The command queries or defines the instrument's current time setting.
The setting command requires administrator rights; refer to
Parameters:
<Hours>
Range:
0...23
<Minutes>
Range:
0...59
<Seconds>
Range:
0...59
Example:
SYST:TIME?
Response:
12,0,0
- it is precisely 12 pm.
SCPI command reference
