Getting Started
R&S
®
ZNA
45
User Manual 1178.6462.02 ─ 20
Generator
PORT
Meas. Receiver
Ref. Receiver
Source Out
Ref Out
Meas Out
The direct generator/receiver access can be used to insert external components (exter-
nal signal separating devices, power amplifiers, extension units etc.) into the signal
path. This feature enables custom measurements, e.g. to test high-power devices or to
extend the dynamic range.
If no external components are connected, each Out/In loop must be closed using a
jumper.
See also
Chapter 3.1.5, "Considerations for test setup"
USB connectors
The front panel offers three USB connectors of type A (master USB).
The USB ports can be used to connect external devices, e.g.:
●
external PC accessories such as mouse or other pointing devices, a keyboard,
printer or external storage device (USB stick, CD-ROM drive etc.)
●
external measurement equipment such as calibration units, power meters, fre-
quency converters, extension units, signal generators, or switch matrices
3.2.2
Rear panel
This section gives an overview of the rear panel elements of the network analyzer.
Instrument tour
