R&S 1332.4500K22, User Manual

Page: 827 / 1709

GUI reference
R&S
®
ZNA
827 User Manual 1178.6462.02 ─ 20
Physical
interface
(connector) Interface
(protocol) Address Remarks
USB USB-VISA <ManID>::<ProdID>::<SerialNo>
e.g.
0x0AAD::0x0047::100098
2733 (0x0AAD) is the manufacturer ID of
Rohde & Schwarz.
71 (0x0047) is an example for a R&S prod-
uct ID (R&S SMF100A).
The serial number is device-specific.
LAN or USB Other Interface-specific, e.g. for SOCKET:
TCPIP0::<IpAddress>::<PortNo>::SOCKET
For USB-VISA:
USB0::<ManID>::<ProdID>::<SerialNo>::INSTR
Use complete VISA resource string.
Remote command:
SYSTem:COMMunicate:RDEVice:GENerator<Gen>:DEFine
5.19.6 Frequency Converter tab
Allows you to set up the R&S ZNA for measurements using external frequency con-
verters.
The buttons on the "Frequency Converter" tab open the following dialogs
●
"Frequency Converter..." opens a dialog that allows you to define the "Converter
Topology", i.e. which converters are used an how they are connected to the
R&S
ZNA. See Chapter 5.19.6.1, "Converter Configuration dialog" , on page 828.
●
"Default Cable and Splitter Losses ..." opens a dialog that lets you specify the los-
ses between the IF and LO ports of the VNA and the converter. See
Chap-
ter 5.19.6.3, "Default Cable and Splitter Losses dialog" , on page 832.
●
"Save Converter Topology..."/"Load Converter Topology..." open standard file save/
open dialogs that allow you to save the current converter topology to a file or to
load a previously defined converter topology from a file (
*.zcxml)
.
●
"Leveling Dataset" opens a dialog that allows you to provide leveling information to
the configuration. See
Chapter 5.19.6.4, "Leveling Datasets dialog" , on page 833.
Setup softtool