R&S 1332.4500K22, User Manual

Page: 1211 / 1709

Command reference
R&S
®
ZNA
1211 User Manual 1178.6462.02 ─ 20
<SweepSegFile> String parameter to specify the name and directory of the cre-
ated sweep segment file. The default extension (manual control)
for sweep segment files is
*.SegList
, although other exten-
sions are allowed.
If no path is specified the analyzer searches the current direc-
tory, to be queried with
MMEMory:CDIRectory
Example: See
MMEMory:LOAD:SEGMent
Usage: Setting only
Manual operation: See "Import.../ Export..." on page 501
MMEMory:STORe:CORRection:SLEVeling<PhyPt> <File>
Persists the current leveling dataset of port <PhyPt> to the specified
*.lev
file
(R&S ZNA-proprietary, binary file format).
The dataset can be recalled using
MMEMory:LOAD:CORRection:
SLEVeling<PhyPt>
.
Suffix:
<PhyPt>
.
Physical port number
Setting parameters:
<File> String parameter containing the path and file name of the
*.lev
file. If the path is omitted, the current directory is used (see
MMEMory:CDIRectory
).
Usage: Setting only
Options: R&S ZNA-K8
Manual operation: See "Load/Save" on page 834
MMEMory:STORe:STATe <Compatibility>, <RecallSetFile>
Stores the configuration data of the current recall set to the specified recall set file.
MMEMory:STORe:STATe
also renames the current recall set. See example for
MMEMory:LOAD:STATe
.
Setting parameters:
<Compatibility> 1 (this value is used for compatibility with the SCPI standard but
ignored).
<RecallSetFile> String parameter to specify the absolute or relative path of the
created recall set file. Relative paths are evaluated relative to
the current directory (see
MMEMory:CDIRectory
).
The default extension for recall set files is
znxml
. Unless you
specify
znx
as file name extension, recall sets are always stored
in
znxml
file format.
Example: See
MMEMory:LOAD:STATe
SCPI command reference