GUI reference
R&S
®
ZNA
390
User Manual 1178.6462.02 ─ 20
●
Frequency Converting Measurements: see
Chapter 5.2.13.2, "Frequency Convert-
●
Two Tone Group Delay Measurements: see
5.5.1.3
Trace Manager dialog
The "Trace Manager" dialog allows you to perform operations on traces.
Access:
Trace – [Trace
Config] > "Traces" > "Trace Manager..."
All existing traces of the current recall set are listed in a table with several editable
(white) or non-editable (gray) columns.
Table Area
The table contains the following columns:
●
"Name" indicates name of the related trace.
Trace names must be unambiguous across all channels and diagram areas in a
recall set.
●
"On" indicates and controls the visibility of the related trace.
●
"Label" indicates and controls the visibility of the related trace label
●
"Meas" indicates the measured parameter.
●
"Type" indicates whether the trace is a data trace ("DAT"), displaying the current
measurement data, or a memory trace ("MEM").
●
"Channel" indicates and controls the channel to which the related trace is assigned.
Data traces and their associated memory traces are always assigned to the same
channel.
Traces softtool
