Fukuda Denshi DynaScope 7000 Series, Operation Manual

Page: 87 / 475

4 － 39
Alarm Level Message Description
2 “System Error (E09-I)” ROM Test Error
2 “System Error (E09-J)” RAM Test Error
2 “System Error (E09-L)” Clock transmission has ceased.
2 “System Error (E09-M)” Communication Failure at Power ON
2 “System Error (E09-N)” Pressure Comparison Failure
2 “System Error (E09-O)” Maximum inflation time has been exceeded.
2 “System Error (E09-Q)” Measurement was started before zero calibration
2 “System Error (E09-R)” Zero Calibration Error
2 “System Error (E09-S)” Watchdog Timeout
2 “System Error (E09-T)” +5V Digital Power Supply Failure
2 “System Error (E09-U)” Main CPU Power Supply Failure
2 “System Error (E09-V)” Pump Control Signal Failure
2 “System Error (E09-W)” Quick Exhaust Valve Control Signal Failure
2 “System Error (E09-X)” Sub CPU Constant Exhaust Valve Control Signal
Failure
2 “System Error (E09-Y)” Main CPU Constant Exhaust Valve Control Signal
Failure
4 “Out of Range”
2 “Lower NIBP Alarm”
2 “Upper NIBP Alarm”
2 “Inflation Timeout (C01)”
*: When NIBP measurement is repeated: Level 4, when measurement is not repeated: Level 1.
*1 will be displayed for only Level 1
SpO
2
(Nellcor
®
Model: DS-7000)
Alarm Level Message
4 “SpO
2
Unit Error”
2 “Disconnect”
2 “SpO
2
Sensor Defective”
2 “Check SpO
2
Sensor”
4 “Motion Artifact”
3 “No Pulse Detect”
3 “Pulse Search”
1 “Lower SpO
2
Alarm”
1 “Upper SpO
2
Alarm”
SpO
2
(Masimo
®
Model: DS-7000M)
Alarm Level Message
4 “SpO
2
Unit Error”
2 “Disconnect”
2 “SpO
2
Sensor Defective”
2 “Check SpO
2
Sensor”
3 “Low Perfusion”
3 “Pulse Search”
3 “SpO
2
Noise”
3 “Check SpO
2
Sensor”
3 “Unknown SpO
2
Sensor”
3 “Low Signal IQ”
1 “Lower SpO
2
Alarm”
1 “Upper SpO
2
Alarm”
4
De
scription of
Alarm Messa
ge and Ala
rm
Sound