Fukuda Denshi DynaScope 7000 Series, Operation Manual

Page: 17 / 475

Precautions about Connections to Peripheral Devices
In the interest of safe and sufficient performance of this equipment, the connection of other
manufacturers’ equipment to the monitor is not authorized, unless the connection is explicitly approved
by Fukuda Denshi. It is the user’s responsibility to contact Fukuda Denshi to determine the compatibility
and warranty status of any connection made to another manufacturer’s equipment.
W A R N I N G
For the connector with mark, only the peripheral devices specified by
Fukuda Denshi should be connected with the given procedure. Use of an
unspecified device may cause electric shock to the patient and/or operator due
to excessive leakage current.
C A U T I O N
All the peripheral device connectors on the DS-7000 are isolated from the
power supply, but the peripheral devices are not isolated. To prevent danger of
electric shock, always position the peripheral devices away from the patient.
When connecting peripheral devices to DS-7000, it is the user’s responsibility to verify that the overall
system complies with EN 60601-1-1, “Collateral Standard: Safety Requirements for Medical Electrical
Systems”.
Precautions about the Fuse
D A N G E R
If the fuse blows, contact Fukuda Denshi Service Representative. Do not
continue using it as internal damage to the equipment may be considered.
Accessories and Optional Accessories
W A R N I N G
Use only the cables specified by Fukuda Denshi.
Not only the DS-7000 cannot deliver its maximum performance but may
also result in increase in emission or decrease in immunity.
xv