Fukuda Denshi DynaScope 7000 Series, Operation Manual

Page: 264 / 475

7 － 20
To Set the Recall Condition
On the recall menu, the storing condition at alarm occurrence can be set.
The recall waveform and recall factor (numeric data, arrhythmia) can be selected.
Press the Recall Setup key to display the “Recall Setup”
window.
1
Select the recall waveform.
Pressing the Waveform key will display the menu to select the recall
waveform.
Up to 2 waveforms can be selected for recall waveform.
Select the recall waveform for Wave 1 and Wave 2.
The key with the LED lighted is the selected waveform.
2
Select the recall factor (numeric data).
Pressing the Numeric key will display the menu to select the numeric data
recall factor.
Select the recall factors by pressing their keys.
The keys with the LED lighted will be the recall factors.
The alarm OFF mark will be displayed inside the parameter
key if the alarm is set to OFF for that parameter.