Fukuda Denshi DynaScope 7000 Series, Operation Manual

Page: 408 / 475

Daily Check List
(incuding the MGU-801P/802/803)
No.
Inspected Date Inspected by Location
Device Type
(Main Unit)
Serial No.
Device Type
(Option Unit)
Serial No.
Device Type
(Multigas Unit)
Serial No.
Item Details Criteria Judgment
Appearance
Visually check the exterior for scratches, cracks,
deformation, and rust.
No abnormality should be found. □ OK / □ NG
Check whether the unit is installed on a level
surface.
The installation area must be
level and free from vibration and
shock.
□
OK /
□
NG
Installation
Check whether the unit is installed in a place
susceptible to adverse environment.
The environmental condition (ex.
temperature, humidity) of the
installed place should be as
specified. The unit should not be
subjected to splashing water.
□ OK / □ NG
The home display appears, and
the LED located on the right side
of the display panel lights.
□
OK /
□
NG
Turn ON the monitor, and check whether it
operates normally.
The date and time should be
correct.
□
OK /
□
NG Functions
Check the control switch and touch key
operation.
It should function properly.
Key sound and alarm sound
should generate.
□
OK /
□
NG
Cables Visually check all cables for any damage. No damage should be found. □ OK / □ NG
Periodic
Inspection Check the date of the previous periodic
inspection.
Should be within 1 year. □ OK / □ NG
Air Filter
(DS-7000)
Check the date, which the air filter was first used
(cleaned, replaced).
Used from: Day Month Year
Should be within 3 months. □ OK / □ NG
Water Trap
(MGU-801P/
802/803) Visually check
The water trap container should
not be half full, or “Replace
Water Trap” message should not
appear.
□
OK /
□
NG
Gas Calibration
(MGU-801P/
802/803 )
Check the date of the previous gas calibration.
Previous calibrated date:
Day Month Year
Should be within 1 year. □ OK / □ NG
Comment
10 － 12