Fukuda Denshi DynaScope 7000 Series, Operation Manual

Page: 124 / 475

4 － 76
Full Disclosure Waveform Recording Setup
Select the waveform for full disclosure waveform recording.
Press the
key to increase the priority of the
selected waveform.
Press the
key to decrease the priority of
the selected waveform.
The 6 waveforms of high priority will be recorded on the
CF card.
For the CO
2
waveform, select the measurement unit
from mmHg/kPa/%.
To Format the CF Card for Full Disclosure Waveform Recording
1
Insert the CF card (FCF-16GA) to CF card slot.
2
Format the CF card.
Pressing the CF Card Format key for more than 3
seconds will automatically determine the CF card type
and starts formatting.
3
When the format is complete, the full disclosure waveform will be automatically recorded on the
CF card.