Fukuda Denshi DynaScope 7000 Series, Operation Manual

Page: 341 / 475

C A U T I O N
z The OR ID is factory set to “000”. If connected to a wired network with
the bed ID unchanged, monitoring on the central monitor will not be
possible.
z When connecting to the DS-LAN
ΙΙ
network, make sure that there are no
other bedside monitors with the same Bed ID/OR ID. If there are more
than one bedside monitors with the same OR ID, the duplicated bedside
monitors cannot be monitored on the central monitor.
z When connecting to the DS-LAN
ΙΙ
network, set the OR ID in the range
from “001” to “048”.
N O T E
When the monitor indicates that the measurement data is out of range
(“
××× ” display), the minimum or maximum value of the range will be
displayed at the central monitor.
【
Out of range
】 【
Central Monitor
】
HR 301bpm or above 300bpm
RR 151Bpm or above 150Bpm
BP –51mmHg or below –50mmHg
301mmhg or above 300mmHg
TEMP –0.1 ° C or below 0 ° C
50.1
°
C or above 50.0
°
C
8
W
ire
d Ne
tw
ork
C
on
str
uc
tion
8 － 19