Fukuda Denshi DynaScope 7000 Series, Operation Manual

Page: 288 / 475

7 － 44
2
Automatically input the current measurement data.
The data already set (height, weight, etc.) and measured data
(HR, etc.) will be automatically input.
MAP (ART), MPAP (PAP), CVP (CVP) can be automatically
input by setting the BP label.
If Auto key is pressed after inputting the data, the input data
will be cleared.
N O T E
CVP data with the unit “cmH
2
O” cannot be automatically input.
3
Input the data using the numeric keypad.
Input the data using the numeric keys, and press the
corresponded key from Height , Weight , BSA ,
CO , HR , MAP , CVP , MPAP , PCWP .
BSA will be automatically calculated when height and weight is
input, but it can be also manually input using the numeric
keypads.
【
Input Data
】
Data Description (Unit)
Height (cm)
Weight
(kg
）
BSA Body Surface Area (m
2
)
CO Cardiac Output (L/min)
HR Heart Rate (bpm
）
MAP
Mean Artery Pressure (mmHg
）
MPAP
Mean Pulmonary Artery Pressure (mmHg
）
CVP
Central Venous Pressure (mmHg
）
PCWP Pulmonary Capillary Wedge Pressure (mmHg)
N O T E
If the height, weight, BSA is changed on the patient admit/discharge menu, mean CI
will be recalculated. However, the hemodynamics will not be recalculated with the
new CI data.
4
Execute the hemodynamics calculation.
After inputting the data, press the Calc. key.
The calculation result will be displayed.
To cancel the calculation, press the Prev. Disp. key.