Fukuda Denshi DynaScope 7000 Series, Operation Manual

Page: 442 / 475

11 － 14
Setup Item Default and Backup
This section lists selection, default setting, and backup status for each setup item.
Backup Status
“
{
” : The setting will be retained even when the power is turned OFF.
“ U ” : The setting will be retained even when the power is turned OFF. When discharge
procedure is performed, the value will be reset to the initial setting.
“
－
” : The setting will be reset to the initial setting when the power is turned OFF.
“
{
/ U ” : The setting will be retained even after a discharge procedure if ON is selected for
“Backup at Discharge” in the “Discharge Mode” menu. If OFF is selected, the
setting will be initialized after a discharge procedure.
Alarm setting will be initialized with the selected alarm mode.
Display configuration will be initialized with the selected display mode.
Reference
Refer to “9. Initial Settings –Operation at Discharge–” for procedure to set “Backup at
Discharge”.
Patient Admit / Discharge
Item Selection Default Backup
Patient Name
Numeric, Alphabet, Symbol
(16 characters)
Blank U
Sex Male, Female Undetermined
U
Age 0 to 150 years or 0 to 999 days 0 year U
Height 0.0 to 300.0cm 0.0cm
U
Weight 0.0 to 350.0kg 0.0kg U
BSA 0.00 to 9.99m
2
0.00 m
2
U
BSA/BMI Display BSA,BMI BSA {
Blood Type A, B, O, AB Rh +/– Blank U
Birth Date Year, Month, Day Blank U
ID
Numeric, Alphabet, Symbol
(20 characters)
Blank U
Patient Classification Adult, Child, Neonate Adult
{
Pacemaker Yes, No No U
Filter Mode Monitor, Diagnosis, ESIS Monitor {
Admit Date Year, Month, Day Blank U