Fukuda Denshi DynaScope 7000 Series, Operation Manual

Page: 383 / 475

Flash Pattern Setup
The flash pattern of the alarm indicator for each alarm generation can be set.
1
Press the Pattern Setup key on the “Alarm Indicator Setup” menu.
2
Set the flash pattern for each alarm level.
First, select the flash pattern from Pattern 1 to
Pattern 10 .
The alarm indicator consists of 3 blocks.
(Left: Red, Center: Red/Orange/Green, Right: Red)
For each pattern, these 3 blocks will flash differently.
By pressing the Pattern Test key, the actual flashing
of the selected pattern can be verified.
9
Alarm Indi
cat
or
Alarm Indicator Flash Pattern
Pattern Flash
Pattern 1
(Red, Red, Red) → (x, x, x) → (Red, Red, Red) → (x, x, x) → (Red, Red, Red)
Pattern 2
(Red, Orange, Red) → (x, x, x) → (Red, Orange, Red) → (x, x, x) → (Red, Orange, Red)
Pattern 3
(Red, Green, Red) → (x, x, x) → (Red, Green, Red) → (x, x, x) → (Red, Green, Red)
Pattern 4
(x, Red, x) → (x, x, x) → (x, Red, x) → (x, x, x) → (x, Red, x)
Pattern 5
(x, Orange, x) → (x, x, x) → (x, Orange, x) → (x, x, x) → (x, Orange, x)
Pattern 6
(x, Green, x) → (x, x, x) → (x, Green, x) → (x, x, x) → (x, Green, x)
Pattern 7
(Red, Red, x) → (x, x, x) → (x, Red, Red) → (x, x, x) → (Red, Red, x)
Pattern 8
(Red, Orange, x) → (x, x, x) → (x, Orange, Red) → (x, x, x) → (Red, Orange, x)
Pattern 9
(Red, Green, x) → (x, x, x) → (x, Green, Red) → (x, x, x) → (Red, Green, x)
Pattern 10 (Red, x, x)
→ (x, x, x) → (x, Red, x) → (x, x, x) → (x, x, Red)
Next, press the alarm level key to assign the selected flash pattern.
9 － 23