Fukuda Denshi DynaScope 7000 Series, Operation Manual

Page: 377 / 475

Measurement Unit
The measurement unit can be changed for BP, CVP, ST, TEMP and CO
2
.
When the measurement unit is changed, tabular data and trend data from the previous measurement
unit will be deleted.
When the measurement unit is changed, make sure to set the alarm for the corresponding
measurement unit.
1
Press the Menu
→
Initial Settings
→
Unit keys.
The measurement unit setup menu will be displayed.
2
Set the measurement unit for “BP”, “CVP”, “ST”, “TEMP”, and “CO
2
”.
BP : Set the measurement unit for BP. (mmHg or kPa)
CVP : Set the measurement unit for CVP (Central Venous Pressure) when set as BP user label.
(mmHg/kPa or cmH
2
O)
9
ST : Set the measurement unit for ST. (mV or mm)
TEMP : Set the measurement unit for TEMP. ( ° C or ° F)
CO
2
: Set the measurement unit for CO
2
. (mmHg or kPa or %)
Mea
sureme
nt Unit
Height, Weight: Set the measurement unit for patient’s height and weight. (“cm, kg” or “in, lb”)
N O T E
The measurement unit selection for “Height, Weight” will not be displayed if
communication with the central monitor is established. The unit for height and weight
will be fixed as “cm, kg”.
9 － 17