Fukuda Denshi DynaScope 7000 Series, Operation Manual

Page: 251 / 475

7 － 7
●
Parameter Setup for the Basic Table
The parameter to be displayed on the basic table can be set.
1
Press the Basic Table Setup key on the table screen.
2
Set the priority of the parameters to be displayed on the basic table.
The display priority is high from the top. On the basic table
display, the higher priority parameter will be displayed
from the left.
3
Select the parameter for each priority level.
The parameter can be selected by directly pressing the
key or using the up and down arrow keys.
The priority level will automatically shift downwards to
allow continuous parameter selection.
7
Table/T
rend