Fukuda Denshi DynaScope 7000 Series, Operation Manual

Page: 343 / 475

Ward Name/OR ID Setup
To connect to a wired network, it is necessary to set the ward name and the operating room ID.
1
Press the Menu → Initial Settings → Operation Room keys.
The Operation Room Setup menu will be displayed.
2
Set the “Ward Name”.
Enter the Ward Name using the alphanumeric keypad.
The entered ID will be displayed on the upper left of the
screen.
Next, press the OR ID
key to display the Operation
Room ID menu.
8
W
ire
d Ne
tw
ork
C
on
str
uc
tion
3
Set the “Operation Room ID”.
Enter the Operation Room ID using the numeric keypad.
The entered ID will be displayed on the upper left of the
screen.
When using DS-LAN
ΙΙ network, set the ID in the range
from 001 to 048.
4
Set the “DS-LAN Pat. ID Tx Transmission Start Position”.
On the DS-7000, patient ID of up to 20 digits can be set,
but only 10 digits can be transmitted on a wired network
(DS-LAN
II ). This setup allows setting the starting digit of
the 10 digits to be transmitted.
: The starting digit will shift to the left.
: The starting digit will shift to the right.
N O T E
On the DS-7000, patient ID of up to 20 digits can be set, but only 10 digits can be
transmitted on a wired network.
8 － 21