Fukuda Denshi DynaScope 7000 Series, Operation Manual

Page: 135 / 475

To Enter the Patient Information from the Magnetic Card or Bar Code
By using the magnetic card reader and bar code reader, patient information can be automatically
entered at patient admittance.
The admittance process will speed up compared to manually entering each information.
Reference
To automatically enter the patient information from the magnetic card or bar code, it is
necessary to perform the setup in advance.
→ “8. Installation Magnetic Card Reader Setup”
→
“8. Installation Bar Code Reader Setup”
1
Read the data from the magnetic card or bar code.
The read data will be displayed on the monitor.
5
Admitting a Patient
2
Select whether or not to automatically enter the read data as the patient information.
Select from Enter Patient Data / Cancel .
Enter Patient Data will replace the current patient information with the read data.
Cancel will not enter the read data as the patient information.
The item not read from the magnetic card or bar code will be left blank.
For the blank item, manually input the information.
5 － 9