Fukuda Denshi DynaScope 7000 Series, Operation Manual

Page: 189 / 475

6 － 41
●
Synchronization Mark/Tone
A mark synchronized to HR or PR can be displayed inside the numeric data box.
A synchronization tone will be also generated.
1
Select HR , PR or OFF for “Sync. Mark/Tone”.
HR will display a mark synchronized to HR and will
generate HR synchronized tone.
PR will display a mark synchronized to BP or SpO
2
according to the priority set for the PR source. PR
synchronized tone will be also generated.
OFF will not display a synchronized mark and will not
generate a synchronized tone.
Sync. will display a mark and generate a tone synchronized
to HR, BP, or SpO
2
according to the alarm source.
●
HR/PR Alarm Source
1
Set the “HR/PR Alarm Source”.
HR will generate an alarm based on HR.
PR will generate an alarm based on BP or SpO
2
according
to the priority set for the PR source.
Auto will automatically select the alarm source according to
the priority set on the “Source Setup” (Initial Settings).
W A R N I N G
The HR/PR alarm will not be generated unless the numeric data box
corresponded to the selected HR/PR alarm source is displayed. When the
HR/PR alarm source selection is changed, be sure to display the numeric
data box corresponded to the selected HR/PR source.
C A U T I O N
If “HR/PR Alarm Source” is PR, and “PR Source” is BP, the ECG waveform
will not be transmitted on a wired network. On the central monitor, the PR-IBP
value will be displayed for HR. However, the HR value from ECG will be
displayed for the NIBP list and ST measurement table.
N O T E
z The synchronized mark will be displayed inside the numeric data box for
the selected “Sync. Mark/Tone” source regardless of the “HR/PR Alarm
Source” setting.
z
The “Sync. Mark/Tone” and “HR/PR Alarm Source” settings will be
synchronized with the HR/PR user key function.
6
SpO
2