Fukuda Denshi DynaScope 7000 Series, Operation Manual

Page: 399 / 475

Storage Device/Recording Paper
This section describes about the storage of the device and recording paper.
Storing the Device
y Store in a place where the device will not be exposed to splashing water.
y Store in a place where the device will not be adversely affected by atmospheric pressure,
temperature, humidity, ventilation, sunlight, dust or atmosphere containing salt or sulfur.
y Store in a level area where the device is not exposed to vibration and shock (including during
transportation).
y The following environmental conditions should be observed when storing the device.
Storage Temperature : –10 to 60
°
C (with MGU-801P/802/803)
–5 to 50
°
C (with MGU-701/702/Poet IQ)
Storage Humidity : 10 to 90% at 40
°
C (non-condensing) (with MGU-801P/802/803)
15 to 90% at 40
°
C (non-condensing) (with MGU-701/702/Poet IQ)
Storing the Recording Paper
This device utilizes heat sensitive recording paper. If placed in a high temperature for a long period of
time, the print may become indistinct, and unable to read. When storing, follow the precautions below.
y Store in a place where light is shut off and avoid direct sunlight.
y Do not leave the paper in high temperature (50°C/122°F or above).
y Do not store the paper in a polyvinyl chloride bag.
y Do not expose the paper to alcohol, hydrochloric acid, or ester ketone.
y Avoid using adhesive agents other than water based glue.
10
Storage
10 － 3