1
Mounting of the Holder Arm for Treatment Tube
After assembly, the device should appear as indicated in Figure 1 below.
Figure 1
Rod
Support bracket
Grommet
Articulated joint
Page 1: ...1 Mounting of the Holder Arm for Treatment Tube After assembly the device should appear as indicated in Figure 1 below Figure 1 Rod Support bracket Grommet Articulated joint...
Page 2: ...lated joint 5 Hook 6 2 screws M5x25 and an allen key 2 Before starting please assemble the glass plate onto the Cryo V6 0 as indicated in the User Manual Cryo V6 0 Chapter 2 Assembly Instructions 3 Th...
Page 3: ...t to the bottom of the Cryo V6 0 threads are already inserted into the device bottom Figure 4 5 Now push the rod through the hole in the glass plate Figure 5 and snap it into the snap on connection on...
Page 4: ...4 6 Screw the articulated joint onto the rod 7 Then screw the hose holder onto the articulated joint 8 Hang the hook onto the articulated joint Figure 7...
