Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 660 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 660 of 825
Ceragon Proprietary and Confidential
root> ethernet lldp agent-admin-set interface eth slot 1 port 2
agent-admin txAndRx
root> ethernet lldp agent-notif-enable interface eth slot 1
port 2 agent-notif-enable true
19.2.4 Displaying LLDP Port Parameters (CLI)
To display the LLDP agent configuration on all ports, enter the following command
in root view:
root> ethernet lldp agent-configuration-show
The following is a sample output of the command:
19.2.5 Displaying LLDP Local System Parameters (CLI)
This section includes:
• Displaying Local Unit Parameters (CLI)
•
Displaying Local Port Parameters (CLI)
• Displaying Local Unit Management Information (CLI)
• Displaying Local Unit Management Information per Port (CLI)
•
Displaying Unit’s Destination MAC Addresses (CLI)
19.2.5.1 Displaying Local Unit Parameters (CLI)
To display the local unit's unit parameters, as transmitted by the LLDP agents,
enter the following command in root view:
root> ethernet lldp local-system-scalars-show
The following information is displayed:
•
local Chassis Id Subtype - The type of encoding used to identify the local unit.
In this release, this parameter is always set to 4 (MAC Address).
•
local Chassis Id - The MAC Address of the local unit.
• local System Name - The system name included in TLVs transmitted by the
LLDP agent. To define the system name, see Configuring Unit Parameters
(CLI) .
• local System Description - The system description included in TLVs
transmitted by the LLDP agent.
• local System Cap Supported - A bitmap value used to identify which system
capabilities are supported on the local system, as included in TLVs transmitted
by the LLDP agent. The bitmap is defined by the following parameters: