User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 56 of 825
Ceragon Proprietary and Confidential
1.9.4
The Radio Summary Page
The Radio Summary page gathers the key link and radio parameters on a single
page for quick viewing. To display the Radio Summary page, select
Radio
Summary
from the Web EMS main menu.
Figure 11: Radio Summary Page
The Radio Summary page includes:
•
Link Status
–
Link status per radio carrier, including whether or not the link is
Up, groups to which the link is assigned (such as LAG, XPIC, protection, and/or
Multi-Carrier ABC), and the IP address (both IPv4 and IPv6) of the remote
carrier. For additional information, see
Configuring the Radio Parameters
•
Radio Information
–
The TX and RX frequencies, frequency separation, and
channel bandwidth on which the link is operating. For additional information,
see
Configuring the Radio Parameters
•
Remote Radio Parameters
–
Key information about the status of the remote
carrier. For additional information, see
•
Radio
Transmitter
–
Mute status, maximum and operational TX level,
modulation, and bit rate. For additional information, see
•
Radio Receiver
–
Receiver PMs and statistics, including defective blocks,
modem MSE, and RX level, modulation, and bit rate. For additional
information, see
Configuring the Radio Parameters
The Radio Summary page can be customized to include only specific columns and
tables. This enables you to hide information you do not need in order to focus on
the information that is most relevant.
To hide a specific section of the Radio Summary page, click the section title. To
display a section that has been hidden, click the section title again.
To customize which columns appear in a section, click next to the section title. A
list of columns is displayed. Select only the columns you want to display and click
again.
Note:
When one or more columns are hidden, the icon turns white ( ).
