Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 320 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 320 of 825
Ceragon Proprietary and Confidential
6 In the Green curve max drop ratio field, enter the maximum percentage (1-
100) of dropped green packets for queues with this profile.
7 In the Yellow curve min point field, enter the minimum throughput of yellow
packets for queues with this profile, in Kbytes (0-8192). When this value is
reached, the system begins dropping yellow packets in the queue.
8 In the Yellow curve max point field, enter the maximum throughput of yellow
packets for queues with this profile, in Kbytes (0-8192). After this value is
reached, all yellow packets in the queue are dropped.
9 In the Yellow curve max drop ratio field, enter the maximum percentage (1-
100) of dropped yellow packets for queues with this profile.
10 Click Apply , then Close .
7.5.2.2 Editing a WRED Profile
To edit a WRED profile:
1 Select
Ethernet > QoS > WRED > WRED Profile . The WRED Profile page opens
( Figure 241 ).
2 Select the profile you want to edit and click Edit. The WRED Profile – Edit page
opens. This page is similar to the WRED Profile – Add page ( Figure 242 ). You
can edit any parameter except the WRED Profile ID .
3 Modify the profile.
4 Click
Apply , then Close .
7.5.2.3 Deleting a WRED Profile
You cannot delete a WRED profile that is assigned to a queue. You must first
remove the WRED profile from the queue, then delete the WRED profile. See
Assigning WRED Profiles to Queues .
To delete a WRED profile, select the profile in the WRED Profile Configuration
table (
Figure 241 ) and click Delete . The profile is deleted.
To delete multiple WRED profiles:
1 Select the profiles in the WRED Profile Configuration table or select all the
profiles by selecting the check box in the top row.
2 Click Delete . The profiles are deleted.