User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 266 of 825
Ceragon Proprietary and Confidential
Figure 197: Ethernet Services - Add page
3 In the
Service ID
field, select a unique ID for the service. You can choose any
unused value from 1 to 1024. Once you have added the service, you cannot
change the Service ID. Service ID 1025 is reserved for a pre-defined
management service.
4 In the
Service Type
field, select the service type:
◦
MP
–
Multipoint
◦
MNG
–
Management
◦
P2P
–
Point-to-Point
5 Optionally, in the
EVC ID
field, enter an Ethernet Virtual Connection (EVC) ID
(up to 20 characters). This parameter does not affect the network element’s
behavior, but is used by the NMS for topology management.
6 Optionally, in the
EVC Description
field, enter a text description of the service
(up to 64 characters). This parameter does not affect the network element’s
behavior, but is used by the NMS for topology management.
7 In the
Admin
field, select one of the following options:
◦
Operational
- The service is functional.
◦
Reserved
- The service is disabled until this parameter is changed to
Operational
. In this mode, the service occupies system resources but is
unable to receive and transmit data.
8 In the
MAC table size
field, enter the maximum MAC address table size for the
service. The MAC address table is a source MAC address learning table used to
forward frames from one service point to another. You can select a value from
16 to 131,072, in multiples of 16. This maximum only applies to dynamic, not
static, MAC address table entries.
