User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 759 of 825
Ceragon Proprietary and Confidential
23.12.3
MGT GbE Electrical Interface (RJ-45) LEDs
There are two LEDs next to the MGT interface, a Green LED to the left of the
interface and an Orange LED to the right of the interface.
The Orange LED indicates the interface's Admin and cable connection status, and
whether there is traffic on the interface:
•
Off
- Admin is Disabled
or
no cable is connected to the interface.
•
Green
- Admin is Enabled and a cable is connected to the interface.
•
Blinking Green
- Admin is Enabled and a cable is connected to the interface,
and
there is traffic on the interface.
The Green LED is not functional in this release.
23.12.4
Radio LED
The Radio LED indicates the status of the radio link:
•
Off
–
The radio is off; the carrier is Admin = Disabled in the Interface Manager.
•
Green
- The power is on, and the carrier is operational (up).
•
Orange
–
A signal degrade condition exists on the carrier.
•
Red
- A loss of frame (LOF) or excessive BER condition exists on the carrier.
23.12.5
Status LED
The Status LED indicates the status of the main board:
•
Off
–
The power is off.
•
Green
- The power is on, and no alarms are raised on the motherboard.
•
Orange
- The power is on, and one or more minor alarms or warnings are
raised on the motherboard.
•
Red
- The power is on, and one or more major or critical alarms are raised on
the motherboard.
