Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 310 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 310 of 825
Ceragon Proprietary and Confidential
1 Select the profiles in the Policer Profile table or select all the profiles by
selecting the check box in the top row.
2 Click Delete . The profiles are deleted.
7.3.3 Assigning Policers to Interfaces
To assign policers to a logical interface:
1 Select
Ethernet > Interfaces > Logical Interfaces . The Logical Interfaces page
opens ( Figure 221 ).
2 Select the interface in the Ethernet Logical Port Configuration table and click
Policers . The Policers page opens.
Figure 233: Logical Interfaces – Policers Page – Unicast Policer (Default)
For a logical interface, you can assign policers to the following traffic flows:
• Unicast Policer
•
Multicast Policer
• Broadcast Policer
• Ethertype Policers
7.3.3.1 Assigning Unicast Policers
To assign a policer for unicast traffic to a logical interface:
1 Select
Ethernet > Interfaces > Logical Interfaces . The Logical Interfaces page
opens ( Figure 221 ).
2 Select the interface in the Ethernet Logical Port Configuration Table and click
Policers . The Policers page opens. By default, the Policers page opens to the
Unicast Policer table ( Figure 233 ).