User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 761 of 825
Ceragon Proprietary and Confidential
23.13.3
DC
One or two DC ports, depending on the PoE Injector model:
Two models of the PoE Injector are available:
•
PoE_Inj_AO_2DC_24V_48V
–
Includes two DC power ports with power input
ranges of ±(18-60)V each.
•
PoE_Inj_AO
–
Includes one DC power port (DC Power Port #1), with a power
input range of ±(40-60)V.
These ports are UL-60950 compliant, with a 2-pin connector.
23.14
PoE Injector LEDs
•
PWR1 (Bi-color LED)
◦
Green
–
Power available on PWR1 DC input
◦
Off
–
No power is available on PWR1 DC input.
•
PWR2 (Bi-color LED)
◦
Green
–
Power available on PWR2 DC input,
◦
Off
–
No power is available on PWR2 DC input.
•
PoE (Tri -color LED)
◦
Orange
–
No load is detected
◦
Green
–
Providing in-line power
◦
Blinking Red
–
Invalid/over-load
◦
Off
–
no power to the
injector unit.
23.14.1
Radio LED
The Radio LED indicates the status of the radio link:
•
Off
–
The radio is off.
•
Green
- The power is on, and all carriers are operational (up).
•
Orange
- A signal degrade condition exists in at least one carrier.
•
Red
- A loss of frame (LOF) or excessive BER condition exists in at least one
carrier.
