User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 531 of 825
Ceragon Proprietary and Confidential
16.1.1
Displaying Communication Status with the Remote Radio (CLI)
To display the communication status with the remote radio, enter the following
command in radio view:
radio[x/x]>remote-unit communication status show
16.1.2
Displaying the Remote Radio’s Link ID (CLI)
To display the remote radio’s Link ID,
enter the following command in radio view:
radio[x/x]>remote-unit show link-id
16.1.3
Muting and Unmuting the Remote Radio (CLI)
To mute or unmute the remote radio, enter the following command in radio view:
radio[x/x]>remote-unit mute set admin <admin>
To display the mute status of the remote radio, enter the following command in
radio view:
radio[x/x]>remote-unit mute show status
Table 110: Remote Radio Mute/Unmute CLI Parameters
Parameter
Input Type
Permitted Values
Description
admin
Variable
on
off
Mutes (on) or unmutes
(off) the remote unit.
The following command mutes the remote radio:
radio[2/1]>remote-unit mute set admin on
The following command unmutes the remote radio:
radio[2/1]>remote-unit mute set admin off
16.1.4
Displaying the Remote Radio’s RX Level (CLI)
To display the remote radio’s RX level,
enter the following command in radio
view:
radio[x/x]>remote-unit show rx-level
16.1.5
Configuring the Remote Radio’s TX Level (CLI)
To set the transmit (TX) level of the remote radio, enter the following command in
radio view:
radio[x/x]>remote-unit set tx-level <tx-level>
To display the transmit (TX) level of the remote radio, enter the following
command in radio view:
radio[x/x]>remote-unit show tx-level
Table 111: Remote Radio TX Level CLI Parameters
Parameter
Input Type
Permitted Values
Description
