User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 259 of 825
Ceragon Proprietary and Confidential
describes the capacity and throughput PMs.
Note:
To display the same parameters for a specific interval in a separate
page, select the interval in the PM table and click
View
.
Table 42: Capacity/Throughput PMs
Parameter
Definition
Time interval index
For 24-hour intervals, displays the date of the interval. For 15-minute
intervals, displays the date and ending time of the interval.
Peak capacity (Mbps)
Displays the highest L1 bandwidth, in Mbps, sent through the selected
radio during the measured time interval.
Average capacity
(Mbps)
Displays the average L1 bandwidth, in Mbps, during the measured time
interval.
Seconds exceeding
Threshold
Displays the number of seconds during the measured time interval
during which the L1 bandwidth exceeded the configured capacity
threshold.
Peak throughput
(Mbps)
Displays the highest throughput, in Mbps, that occurred for the selected
radio during the measured time interval.
Average throughput
(Mbps)
Displays the average throughput, in Mbps, for the selected radio during
the measured time interval.
Seconds exceeding
Threshold
Displays the number of seconds during the measured time interval
during which the throughput exceeded the configured throughput
threshold.
Integrity
Indicates whether the values received at the time and date of the
measured interval are reliable. An x in the column indicates that the
values are not reliable due to a possible power surge or power failure
that occurred at that time.
5.6.9.2
Displaying Utilization PMs
To display radio capacity utilization PMs per radio:
1 Select
Radio > PM & Statistics > Traffic > Utilization
. The Utilization PM report
page opens.
