User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 219 of 825
Ceragon Proprietary and Confidential
4.11
Configuring Unit Parameters
To view and configure system information:
1 Select
Platform > Management > Unit Parameters
. The Unit Parameters page
opens.
describes the fields in the Unit Parameters page.
Figure 157: Unit Parameters Page
Table 28: Unit Parameters
Parameter
Definition
Name
A name for the unit (optional, up to 128 characters). This name appears at the
top of every Web EMS page.
Description
Descriptive information about the unit. This information is used for debugging,
and should include information such as the unit type.
System up time
The time since the system was last reinitialized.
Contact person
The name of the person to be contacted if and when a problem with the
system occurs (optional).
Location
The actual physical location of the node or agent (optional).
Longitude
The unit's longitude coordinates.
Latitude
The unit's latitude coordinates.
Measurement
format
The type of measurement you want the system to use:
Metric
or
Imperial
.
Unit
Temperature
The current temperature of the unit. If the unit temperature goes lower than -
40°C or higher than 90°C, the unit raises an extreme temperature alarm
