User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 661 of 825
Ceragon Proprietary and Confidential
◦
0 - other
◦
1 - repeater
◦
2 - bridge
◦
3 - wlanAccessPoint
◦
4 - router
◦
5 - telephone
◦
6 - docsisCableDevice
◦
7 - stationOnly
◦
8 - cVLANComponent
◦
9 - sVLANComponent
◦
10 - twoPortMACRelay
•
local System Cap Enabled
- A bitmap value used to identify which system
capabilities are enabled on the local system, as included in TLVs transmitted
by the LLDP agent. The bitmap is defined by the following parameters:
◦
0 - other
◦
1 - repeater
◦
2 - bridge
◦
3 - wlanAccessPoint
◦
4 - router
◦
5 - telephone
◦
6 - docsisCableDevice
◦
7 - stationOnly
◦
8 - cVLANComponent
◦
9 - sVLANComponent
◦
10 - twoPortMACRelay
19.2.5.2
Displaying Local Port Parameters (CLI)
To display local port parameters, as transmitted by the LLDP agent, enter the
following command in root view:
root> ethernet lldp local-port-show
The following information is displayed:
•
Interface type/slot/port
- The port type, slot number, and port number.
•
Port ID Subtype
- The type of encoding used to identify the port in LLDP
transmissions. In this release, this parameter is always set to MAC Address.
•
Port ID
- The port's MAC address.
•
Description
- A text string that describes the port. In this release, this
parameter is always set to ethPort.
