User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 345 of 825
Ceragon Proprietary and Confidential
Table 60: LLDP Configurable Configuration Parameters
Parameter
Definition
TX Interval (Seconds)
Defines the interval, in seconds, at which LLDP frames are
transmitted. You can select a value from 5 to 32768. The default
value is 30.
Notification Interval (Seconds)
Defines the interval, in seconds, between transmission of LLDP
notifications during normal transmission periods. You can select
a value from 5 to 3600. The default value is 10.
Hold Multiplier
Defines the time-to-live (TTL) multiplier. The TTL determines the
length of time LLDP frames are retained by the receiving device.
The TTL is determined by multiplying the TX Interval by the Hold
Multiplier.
You can select a value from 2 to 10. The default value is 4.
8.2.4
Configuring the LLDP Port Parameters
To enable LLDP per port and determine how LLDP operates and which TLVs are
sent for each port:
1 Select
Ethernet > Protocols > LLDP > Advanced > Configuration > Port
Configuration
. The LLDP Port Configuration page opens.
Figure 264: LLDP Port Configuration Page
2 Select an interface and click
Edit
. The LLDP Port Configuration - Edit page opens.
