User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 699 of 825
Ceragon Proprietary and Confidential
21.9
Uploading the Configuration Log (CLI)
The configuration log lists actions performed by users to configure the system.
This file is mostly used for security, to identify suspicious user actions. It can also
be used for troubleshooting.
In order to upload the configuration log, you must install an FTP or SFTP server on
the laptop or PC from which you are performing the upload. IP-20 works with any
standard FTP or SFTP server. For details, see
Installing and Configuring an FTP or
To set the FTP or SFTP parameters for configuration log export, enter the
following command in root view:
root> platform security configuration-log-upload-params set
path <path> file-name <file-name> ip-address <ip-address>
protocol <protocol> username <username> password <password>
To display the FTP or SFTP parameters for configuration log export, enter the
following command in root view:
root> platform security configuration-log-upload-params show
To export the configuration log, enter the following command in root view:
root> platform security configuration-log upload
To display the status of a configuration log export operation, enter the following
command in root view
root> platform security configuration-log-upload-status show
Table 233: Configuration Log CLI Parameters
Parameter
Input Type
Permitted Values
Description
path
Text String
The directory path to which you are
exporting the configuration log. Enter the
path relative to the FTP user's home
directory, not the absolute path. If the
location is the home directory, it should be
left empty. If the location is a sub-folder
under the home directory, specify the folder
name. If the shared folder is "C:\", this
parameter can be left empty or populated
with "//".
file-name
Text String
The name you want to give the file you are
exporting.
Note:
You must add the suffix .zip to the
file name. Otherwise, the file import may
fail. You can export the file using any name,
then add the suffix .zip manually. For
example: UnitInfo.zip
If the Unit Information file is exported
several times consecutively, the file itself will
not be replaced. Instead, the filename will be
