Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 335 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 335 of 825
Ceragon Proprietary and Confidential
5 Click Apply , then Close .
7.7.3.2 Editing a WFQ Priority Profile
To edit a scheduler WFQ profile:
1 Select
Ethernet > QoS > Scheduler > WFQ Profiles . The Scheduler WFQ Profile
page opens ( Figure 255 ).
2 Select the profile you want to edit and click Edit . The Scheduler WFQ Profile –
Edit page opens. This page is similar to the Scheduler WFQ Profile – Add page
( Figure 256 ). You can edit any parameter except the Profile ID .
3 Modify the profile.
4 Click
Apply , then Close .
7.7.3.3 Deleting a WFQ Profile
To delete a scheduler WFQ profile, select the profile in the Scheduler WFQ
Profiles page (
Figure 255 ) and click Delete . The profile is deleted.
To delete multiple scheduler WFQ profiles:
1 Select the profiles in the Scheduler WFQ Profiles page or select all the profiles
by selecting the check box in the top row.
2 Click Delete . The profiles are deleted.
7.7.4 Assigning a Priority Profile to an Interface
To assign a priority profile to an interface:
1 Select
Ethernet > Interfaces > Logical Interfaces . The Logical Interfaces page
opens ( Figure 221 ).
2 Select an interface in the Ethernet Logical Port Configuration table and click
Scheduler . The Logical Interfaces – Scheduler page opens, with the Egress Port
Scheduling Priority Configuration – Edit page open by default.