User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 640 of 825
Ceragon Proprietary and Confidential
root> ethernet qos port-priority-profile-tbl edit profile-id 1
cos0-priority 1 description c0_p1 cos1-priority 1 description
c1_p1 cos2-priority 1 description c2_p1 cos3-priority 2
description c3_p2 cos4-priority 2 description c4_p2 cos5-
priority 3 description c5_p3 cos6-priority 3 description c6_p3
cos7-priority 4 description c7_p4
18.6.4
Attaching a Priority Profile to an Interface (CLI)
To attach a priority profile to an interface, go to interface view for the interface
and enter the following command:
eth type eth [x/x]> priority set profile-id <profile-id>
To display which priority profile is attached to an interface, go to interface view
for the interface and enter the following command:
eth type eth [x/x]> port-priority show profile-id
Table 201: Attaching Priority Profile to Interface CLI Parameters
Parameter
Input Type
Permitted Values
Description
profile-id
Number
1
–
9
Enter the ID of one of the configured
logical interface priority profiles.
The following command attaches Interface Priority Profile 3 to GbE 1:
eth type eth [1/1]> priority set profile-id 3
The following is a sample output from the
port-priority show profile-id
command:
eth type eth [1/1]>port-priority show profile-id
Profile ID: 9
CoS Priority Priority Description
(When queue is green) (When queue is yellow)
0 1 1 best effort
1 2 1 data service
2 2 1 data service
3 2 1 data service
4 2 1 data service
5 3 1 real time
6 3 1 real time
7 4 4 management
eth type eth [1/1]>
18.6.5
Configuring Weighted Fair Queuing (WFQ) (CLI)
This section includes:
•
•
Configuring a WFQ Profile (CLI)
•
