Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 148 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 148 of 825
Ceragon Proprietary and Confidential
2 Select the LAG group you want to edit in the Link Aggregation table.
3 Click
Edit underneath the Link Aggregation table. The Link Aggregation - Edit
page opens.
Figure 93: Link Aggregation - Edit Page
4 Do any of the following:
◦
To enable or disable LACP, select Enable or Disable in the LACP field. See
LAG Overview for restrictions.
◦
To enable or disable LAG Group Shutdown in case of Degradation Event,
select
Enable or Disable in the LAG degrade field. See Enabling and
Disabling LAG Group Shutdown in Case of Degradation Event for
restrictions.
◦
To remove an interface from the LAG Group, select the interface in
the
Remove Member field.
◦
To add an interface to the LAG Group, select the interface in the Add
Member field.
5 Click Apply .
6 To remove or add additional interfaces, repeat steps 4 and 5.
7 When you are finished, click
Close to close the Link Aggregation – Edit page.
Notes: When removing an interface from a LAG group, the removed interface
is assigned the default interface values.
For information about the LAG degrade field, see Enabling and
Disabling LAG Group Shutdown in Case of Degradation Event .
3.5.3 Enabling and Disabling LAG Group Shutdown in Case of Degradation Event
Note: LAG Group Shutdown in Case of Degradation Event cannot be used
with LACP.