User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 533 of 825
Ceragon Proprietary and Confidential
You cannot use ATPC in MIMO mode. See
To enable or disable ATPC, enter the following command in radio view:
radio[x/x]>atpc set admin <admin>
To display whether or not ATPC is enabled, enter the following command in radio
view:
radio[x/x]>atpc show admin
To set the RX reference level for ATPC, enter the following command in radio view
radio[x/x]>atpc set rx-level atpc_ref_rx_level <rx-level>
To display the RX reference level for ATPC, enter the following command in radio
view:
radio[x/x]>atpc show rx-level
To set an ATPC override timer, enter the following command in radio view:
radio[x/x]>atpc set override timeout <timeout>
Note:
The next command actually enables ATPC override. However, it is
recommended to set the timer before enabling ATPC override. Failure
to do so can lead to unexpected reduction of the TX power with
corresponding loss of capacity if TX override is enabled with the timer
set to a lower-than-desired value.
To enable ATPC override, enter the following command in radio view. ATPC must
be enabled before you enable ATPC override.
radio[x/x]>atpc override set admin <override admin>
To display whether or not ATPC override is enabled, enter the following command
in radio view:
radio[x/x]>atpc override show admin
To display the ATPC override timeout, enter the following command in radio view:
radio[x/x]>atpc show override timeout
To set the TX power to be used when the unit is in an ATPC override state, enter
the following command in radio view:
radio[x/x]>atpc set override-tx-level <override-tx-level>
To display the ATPC override TX power, enter the following command in radio
view:
radio[x/x]>atpc show override tx-level
To display the current ATPC override state, enter the following command in radio
view:
radio[x/x]>atpc show override
Possible values are:
•
Normal
–
ATPC override is enabled, and there is no override.
•
Disabled
–
ATPC override is not enabled.
•
Override
–
ATPC override has been activated.
