Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 312 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 312 of 825
Ceragon Proprietary and Confidential
7.3.3.3 Assigning Broadcast Policers
To assign a policer for broadcast traffic to a logical interface:
1 Select
Ethernet > Interfaces > Logical Interfaces . The Logical Interfaces page
opens ( Figure 221 ).
2 Select the interface in the Ethernet Logical Port Configuration table and click
Policers . The Policers page opens. By default, the Policers page opens to the
Unicast Policer table ( Figure 233 ).
3 Select Broadcast Policer . The Broadcast Policer table appears.
Figure 235: Logical Interfaces – Policers Page – Broadcast Policer
4 In the Policer profile field, select a profile from the policer profiles defined in
the system. The Policer profile drop-down list includes the ID and description
of all defined profiles.
5 In the Broadcast admin field, select Enable to enable policing on broadcast
traffic flows from the logical interface, or Disable to disable policing on
broadcast traffic flows from the logical interface.
6 Click Apply .
7.3.3.4 Assigning Ethertype Policers
You can define up to three policers per Ethertype value.
To assign a policer to an Ethertype:
1 Select
Ethernet > Interfaces > Logical Interfaces . The Logical Interfaces page
opens ( Figure 221 ).