User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 445 of 825
Ceragon Proprietary and Confidential
13.2.1
PC Setup (CLI)
To obtain contact between the PC and the IP-20 unit, it is necessary to configure
an IP address on the PC within the same subnet as the IP-20 unit. The
default IP-20 IP address is 192.168.1.1. Set the PC address to e.g. 192.168.1.10
and subnet mask to 255.255.255.0. Note the initial settings before changing.
Note:
The IP-20 IP address, as well as the password, should be changed
before operating the system. See
13.3
Logging On (CLI)
Use a telnet connection to manage the IP-20 via CLI. You can use any standard
telnet client, such as PuTTy or ZOC Terminal. Alternatively, you can simply use the
telnet <ip address>
command from the CMD window of your PC or laptop.
The default IP address of the unit is 192.168.1.1. Establish a telnet connection to
the unit using the default IP address.
When you have connected to the unit, a login prompt appears. For example:
login:
At the prompt, enter the default login user name:
admin
A password prompt appears. Enter the default password:
admin
The root prompt appears. For example:
login: admin
Password:
Last login: Mon Apr 13 11:27:02 on console
IP20C
root>
