Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 346 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 346 of 825
Ceragon Proprietary and Confidential
Figure 265: LLDP Port Configuration - Edit Page
3 In the Admin field, select from the following options to define how the LLDP
protocol operates for this port:
◦
TX Only – LLDP agent transmits LLDP frames on this port but does not
update information about its peer.
◦
RX Only – LLDP agent receives but does not transmit LLDP frames on this
port.
◦
TX and RX – LLDP agent transmits and receives LLDP frames on this port
(default value).
◦
Disabled – LLDP agent does not transmit or receive LLDP frames on this
port.
4 In the Notification Enable field, select from the following options to define, on
a per agent basis, whether or not notifications from the agent to the NMS are
enabled:
◦
True – The agent sends a Topology Change trap to the NMS whenever the
system information received from the peer changes.
◦
False – Notifications to the NMS are disabled (default value).
5 Click Apply , then Close .
Table 61 lists and describes the status parameters in the LLDP Port Configuration page.
Table 61: LLDP Port Configuration Status Parameters
Parameter Definition
Interface Location Identifies the port.
Destination Address The destination address of the LLDP agent associated with this port.
TLV TX Indicates which of the unit's capabilities is transmitted by the LLDP agent
for the port:
•
PortDesc – The LLDP agent transmits Port Description TLVs.
•
SysName – The LLDP agent transmits System Name TLVs.
•
SysDesc – The LLDP agent transmits System Description TLVs.
•
SysCap – The LLDP agent transmits System Capabilities TLVs.