Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 812 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 812 of 825
Ceragon Proprietary and Confidential
Alarm ID Name Type Group Description Severity Probable Cause Corrective Action
5100 mkey-mismatch Alarm Equipment Master key mismatch
cross over the link Critical Master Key was not set
correctly. Verify the Master Key.
5101 mkey-no-exist Alarm Equipment No Master Key set,
default value used Warning Crypto module has been
enabled, but no Master
Key has been loaded. Set the Master Key.
5102 general-
encryption-failure Alarm Equipment Payload Encryption
failure Critical 1. Radio LOF on Tx/Rx
direction.
2. The session key does
not match across the
link.
3. The AES admin
setting does not
match across the
link.
1. Validate the MSE on both
sides of the link.
2. Validate the session key on
both sides of the link.
3. Validate the AES admin
setting on both sides of
the link.
5104 kep-initiated Event Equipment Key Exchange Protocol
in progress, Traffic has
been blocked Indeterminate
5105 kep-remote-
initiated Event Equipment Key Exchange Protocol
initiated by remote side Indeterminate
5107 bypass-self-test-
alarm Alarm Equipment FIPS Bypass Self-Test
failed Critical Disk failure
5108 post-fail-alarm Alarm Equipment Power On Self-Test
Failed Critical System failure Reboot the unit.