User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 458 of 825
Ceragon Proprietary and Confidential
13.12.2
Assigning an MRMC Script to a Radio Carrier (CLI)
Once you have a list of valid scripts, you can assign a script to the radio carrier.
The command syntax differs depending on whether you are assigning a script with
ACM support or a script without ACM support.
Note
:
When you enter a command to change the script, a prompt appears
informing you that changing the script will reset the unit and affect
traffic. To continue, enter
yes
. Changing the maximum or minimum
profile does not reset the radio interface.
To assign a script with ACM enabled, enter the following command in radio view:
radio[x/x]> mrmc set acm-support script-id <script-id>
modulation adaptive max-profile <max-profile> min-profile <min-
profile>
To assign a script without ACM enabled, enter the following command in radio
view:
radio[x/x]> mrmc set acm-support script-id <script-id>
modulation fixed profile <profile>
To display the current MRMC script configuration, enter the following command
in radio view:
radio[x/x]>mrmc show script-configuration
Table 86: MRMC Script Assignation to Radio Carrier CLI Parameters
Parameter
Input Type
Permitted Values
Description
script-id
Number
Depends on available
scripts.
The ID of the script you want to
assign to the radio carrier.
modulation
Variable
adaptive
fixed
Determines whether ACM is
enabled (adaptive) or disabled
(fixed).
max-profile
Number
Depends on the unit type.
See
Adaptive ACM mode only: The
maximum profile for the script.
For example, if you select a
maximum profile of 5, the
system will not climb above
profile 5, even if channel fading
conditions allow it.
