User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 68 of 825
Ceragon Proprietary and Confidential
To log in using this cable:
1 The IP address of the CPU is 192.0.2.1. To connect, set up a new Local Area
Connection with an IP address as follows:
◦
IP address: 192.0.2.3
◦
Subnet mask 255.255.255.240
◦
No default gateway
Note:
In the event that you fail to connect using 192.0.2.1, use 192.0.2.2
instead.
2 Connect Channel 2 of the cable to:
◦
IP-20C, IP-20C-HP, and IP-20S: The MGT port on the IP-20 unit.
◦
IP-20E and IP-20V: The EXT port on the IP-20 unit.
3 Connect the single end of the cable to the LAN port on the PC.
4 Verify that the MGT port LED is orange. (When a connection is established
using Channel 1 of the cable, the LED on the MGT port is green.)
Note:
For IP-20E, there is no LED to indicate whether the connection has
been established.
5 The system will prompt you for a user name and password (see
6 Enter the default user name and password:
◦
User Name:
admin
◦
Password:
admin
7 Click
Apply
.
8 After a connection is established, you can view or configure the unit's IP
address using the Web EMS. See
