User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 588 of 825
Ceragon Proprietary and Confidential
The following prompt appears:
radio [2/1]>
The following command enters interface view for LAG 1:
root
>
ethernet
interfaces group lag1
The following prompt appears:
eth type group [64/1]>
Note
:
For simplicity, the examples in the following sections show the prompt
for an Ethernet interface.
17.3.2
Displaying the Operational State of the Interfaces in the Unit (CLI)
To display a list of all interfaces in the unit and their operational states, enter the
following command:
root> platform if-manager show interfaces
The following is a sample output of this command:
17.3.3
Viewing Interface Attributes (CLI)
To display an interface’s
attributes, go to interface view for the interface and
enter the following command:
eth type eth [x/x]>summary show
To display an interface’s current operational state (up or down), go to interface
view for the interface and enter the following command:
eth type eth [x/x]>operational state show
The following command shows the attributes of GbE 1:
eth type eth [1/1]>summary show
The following command shows the operational state of GbE 1:
eth type eth [1/1]>operational state show
17.3.4
Configuring an Interface’s Media Type (CLI)
The Media Type attribute defines the physical interface Layer 1 media type.
Permitted values are RJ-45 and SFP.
To configure an Ethernet interface’s Media Type, go to interface view for the
interface and enter the following command:
eth type eth [x/x]>media-type state set <media type>
Table 155: Interface Media Type CLI Parameters
Parameter
Input Type
Permitted Values
Description
