User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 569 of 825
Ceragon Proprietary and Confidential
Parameter
Input Type
Permitted Values
Description
qinq
•
all-to-one - All C-VLANs and untagged frames
that enter the interface are classified to the
service point. Only valid for SAP service point
types.
•
dot1q - A single C-VLAN is classified to the
service point. Valid for all service point
types.
•
s-tag - A single S- VLAN is classified to the
service point. Valid for SNP and MNG service
point types.
•
bundle-c-tag - A set of multiple C-VLANs is
classified to the service point. Only valid for
SAP service point types.
•
bundle-s-tag - A single S-VLAN and a set of
multiple C-VLANs are classified to the service
point. Only valid for SAP service point types.
•
qinq - A single S-VLAN and C-VLAN
combination is classified to the service point.
Valid for SAP and MNG service point types.
sp-id
Number
1-32 for P2P and MP
services.
1-30 for MNG
services.
This ID is unique within the service.
interface
Variable
eth
radio
The Interface type for the service point:
•
eth - An Ethernet interface.
•
radio - A radio interface.
When you are defining the service point on a
group, such as a LAG, use the group parameter
instead of the interface parameter.
group
Variable
rp1
rp2
rp3
rp4
lag1
lag2
lag3
lag4
mc-abc1
mc-abc2
mc-abc3
mc-abc4
When you are defining the service point on an
HSB group (rp1 - rp-4), a LAG (lag1 - lag4), or a
Multi-Carrier ABC group (mc-abc1 - mc-abc4),
use this parameter instead of the interface
parameter to identify the group. The group
must be defined before you add the service
point.
Note
: Multi-Carrier ABC and HSP protection are
only relevant for IP-20C and IP-20C-HP units.
slot
Number
Ethernet: 1
Radio: 2
