Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 341 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 341 of 825
Ceragon Proprietary and Confidential
8.1.4 Deleting an ABN Entity
To delete an ABN entity:
1 Select
Ethernet > Protocols > Bandwidth Notification . The Bandwidth
Notification page opens ( Figure 259 ).
2 Select the ABN entity in the Bandwidth Notification page.
3 Click
Delete . The ABN entity is removed.
8.1.5 Viewing the Statistics for an ABN Entity
To view the statistics for an ABN entity:
1 Select
Ethernet > Protocols > Bandwidth Notification . The Bandwidth
Notification page opens ( Figure 259 ).
2 Select the ABN entity in the Bandwidth Notification page.
3 Click
Statistics . The Bandwidth Notification - Statistics page opens.
Figure 261: Bandwidth Notification - Statistics Page
Table 57 describes the ABN entity statistics.
Table 57: ABN Entity Statistics Parameters
Parameter Definition
Name The name of the ABN entity.
Tx Messages Counter The number of bandwidth messages transmitted since the counter
was last reset.
Holdoff State The Holdoff state of the monitored link. Options are:
•
Off – Holdoff time measurement has not been started.
•
Counting – Holdoff time measurement has started but the
timeout has not elapsed yet.
•
On – Holdoff measurement time has ended and the current
bandwidth is still below the nominal value.
Holdoff Start Time (mSec) The Holdoff start time for the last event.