User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 405 of 825
Ceragon Proprietary and Confidential
Figure 318: FTP Parameters Page (Security Certification Download & Install)
3 In the
Username
field, enter the user name you configured in the SFTP server.
4 In the
Password
field, enter the password you configured in the SFTP server. If
you did not configure a password for your SFTP user, simply leave this field
blank.
5 In the
Path
field, enter the directory path from which you are uploading the
certificate. Enter the path relative to the SFTP user’s home directory, not the
absolute path. If the location is the home directory, it should be left empty. If
the location is a sub-folder under the home directory, specify the folder name.
If the shared folder is "C:\", this parameter can be left empty or populated
with "//".
6 In the
File Name
field, enter the certificate’s file name in the SFTP server.
7 If the IP address family is configured to be IPv4, enter the IPv4 address of the
PC or laptop you are using as the SFTP server in the
Server IPV4 address
field.
See
Defining the IP Protocol Version for Initiating Communications
8 If the IP address family is configured to be IPv6, enter the IPv6 address of the
PC or laptop you are using as the SFTP server in the
Server IPv6 address
field.
Defining the IP Protocol Version for Initiating Communications
9 Click
Apply
, then
Close
, to save the FTP parameters and return to the Security
Log Upload page.
10 Click
Download
. The certificate is downloaded.
11 Click
Install
. The certificate is installed on the IP-20.
10.7
Blocking Telnet Access
You can block telnet access to the unit. By default, telnet access is not blocked.
To block telnet access:
1 Select
Platform > Security > Protocols Control
. The Protocols Control page
opens.
